Mon - Sat 7AM - 7PM

Fixing Common Roof Problems in 2024

roof maintenance

Your roof is like a shield, protecting your home from wind, rain, and snow. But even the strongest shields can have weaknesses. Over time, roofs can develop leaks, damaged shingles, clogged gutters, and issues with flashing. Ignoring these problems can lead to serious damage to your home, so knowing how to spot and fix them is essential.

In this article, we will examine some of the most common roof problems and how you can fix them. We’ll discuss the causes of leaks, the importance of maintaining your shingles, the role of clean gutters, and the need for proper flashing. By learning how to handle these issues, you can keep your roof in great shape and protect your home from potential damage. Let’s start by understanding what to look for and how to act when you spot a problem.

Leaky Roof: Causes and Solutions

Roof leaks are a common issue that many homeowners encounter. Understanding the causes of leaks can help you take the necessary steps to repair them quickly. One major cause of roof leaks is damaged shingles. Shingles can break or go missing, leaving your roof exposed to water. Another common culprit is improper flashing. Flashing is the material, usually metal, that seals joints in your roof and prevents water from seeping in. Poor installation or damage to flashing can allow water to penetrate your roof.

To repair a leaky roof, you first need to locate the source. Start by checking your attic for signs of water stains. Check your roof for obvious damage, like missing shingles or broken flashing, if it’s safe. Once you identify the problem, replace damaged shingles or repair flashing by replacing the damaged section. Sometimes, especially if the damage is extensive, it’s best to call a professional to ensure the repairs are done properly and safely.

Missing or Damaged Shingles

Missing or damaged shingles are another sign that your roof may need attention. Identifying these problems early can prevent more serious damage down the line. To spot missing or damaged shingles, start by walking around your home and looking for any visible gaps or irregularities on your roof. It’s also useful to check your yard for any shingles that may have fallen off during a storm.

Once you’ve identified the problem, follow these steps to replace the shingles: First, you need to remove the damaged shingle by lifting the edges and removing the nails with a pry bar. Next, slide the new shingle into place, securing it with roofing nails. Ensure the shingle is aligned properly with the surrounding shingles and press down to ensure it’s secure. If you’re not comfortable doing this yourself, or if there are too many damaged shingles, it’s advisable to contact a professional roofer for help. Replacing damaged shingles promptly can save you from bigger issues and extend the life of your roof.

Clogged Gutters and Downspouts

Clogged gutters and downspouts are common issues that can lead to serious roofing problems. When gutters get clogged, water can’t flow properly and ends up overflowing, causing potential damage to your roof, siding, and foundation. Common causes of clogged gutters include leaves, branches, and other debris that accumulate over time. Animals and nests can also block the flow of water, exacerbating the issue.

Cleaning your gutters is an essential maintenance task that can prevent expensive repairs. Follow these simple steps to clean them effectively: First, safely set up a ladder to access your gutters. Using gloves, remove debris like leaves and twigs by hand or with a small trowel. Rinse the gutters with a garden hose to ensure they are clear and that the water flows through the downspouts. If you find that water is not draining well through the downspouts, you might need to use a plumber’s snake to clear any blockages. Regularly maintaining your gutters will help keep your roof in good shape and avoid water damage.

Issues with Flashing

Flashing is a critical component in protecting your roof from water damage. It is typically made of metal and is installed around roof joints, chimneys, vents, and other areas where the roof surface meets a vertical structure. The main job of flashing is to direct water away from these vulnerable points. When flashing is damaged or improperly installed, it can lead to leaks and significant structural issues. Common problems with flashing include corrosion, cracks, and gaps that allow water to seep in.

Repairing flashing issues involves identifying the problem areas first. Look for signs of rust or gaps between the flashing and the roof. To fix these issues, clean the area thoroughly to ensure there’s no debris. Apply roofing cement to seal small gaps or replace sections of damaged flashing entirely. For more extensive flashing repairs, it’s best to contact a professional to ensure the job is done correctly. By addressing flashing issues promptly, you can help protect your roof and home from water damage.


Your roof is a crucial part of your home’s structure, and recognizing the signs that it needs immediate attention can save you from bigger headaches down the line. From leaky roofs to missing or damaged shingles, clogged gutters, and flashing issues, understanding and addressing these problems early can prevent costly repairs. Regular maintenance and quick action are key to ensuring your roof stays in top condition.

If you notice any of these signs on your roof, don’t wait to get them checked out. At Energy Shield of New Hampshire, we specialize in comprehensive roof repair in New Hampshire to keep your home safe and secure. Contact us today to schedule an inspection or to learn more about how we can help protect your roof. Trust Energy Shield of New Hampshire with your roofing needs and ensure your home remains a safe haven for years to come.

Recommended Posts